CLOUD V PHANTOM MINI

When portability and discreteness are combined with enhanced ground material vaporization experience, The CloudV Phantom Mini stands alone with its unique features. The Phantom Mini efficiently heats up your ground products in its convection chamber. With an optimized temperature setting between 410F and 420F, all you need to do is activate your vaporizer and enjoy your Cloud anytime and anywhere.

Cloud Phantom Mini Kit Includes:

1 Cloud Phantom Mini
1 USB Charging Cable
1 Cleaning Brush
1 Packing Tool
1 Owner’s Manual

The Cloud Phantom Mini has a 0.7” diameter and 5.3” height. It can hold approximately 0.2 grams of ground products. The Phantom Mini features a sillicon cover surface which gives a pleasant look to the diffuser and helps control the heat emitted from the chamber.

How does the Phantom Mini work?

Once unpackaged, you need to charge the device for at least 6 hours to condition the battery for future charging during its lifespan. Once fully charged, you need to remove the mouthpiece by turning it counterclockwise and pulling it. Load your heating chamber with your product. Use your packing tool to gently pack – do not over-pack. Place the mouthpiece back on. Next, press the button 3 times in sequence to activate the unit. The LED light on the button will indicate red when heating up and change to blue once it is ready. You can then enjoy your sesh experience. The Phantom mini has a 4 minute shut off time feature. This will prevent unnecessary battery drainage when not in use.

When using the diffuser, hold the device from below the button area as the device gets warm.

How do you maintain the Cloud Phantom Mini?

The CloudV Phantom Mini is easy to maintain and clean. It is recommended to clean the chamber and mouthpiece after each use. To clean the chamber, deactivate the device by locking it. Make sure the device has not been used for at least 30 minutes and is completely cooled off. Remove the mouthpiece and empty the materials using the tool provided in the kit. Next, use the cleaning brush to gently clean the inside of the chamber. You may use small wipes to clean out any leftover particles. To clean the mouthpiece, you may unscrew the filter and clean it gently. You may wipe the mouthpiece completely using rubbing alcohol. Screw back the filter onto the mouthpiece and place the mouthpiece back on the chamber. Maintaining your Phantom will prevent clogging and will allow you to enjoy your draws easily.